I’ve been spending a lot of spare time in the wonderful world of 3d printing.

Having an AnyCubic Mega-S wired up to an octoprint device, to check a lot of my designs look here

https://www.thingiverse.com/haggis_supper/designs/

Adding a Roomba to Home assistant requires a lot of information.

This can be obtained easily if you have docker, you can run the following commands

docker run -it --rm python /bin/bash
root@404510a802de:/# git clone https://github.com/NickWaterton/Roomba980-Python.git
root@404510a802de:/# cd Roomba980-Python/
root@404510a802de:/Roomba980-Python# pip install six
root@404510a802de:/Roomba980-Python# python ./roomba/getpassword.py -R <IP>

Or just the commands:

docker run -it --rm python /bin/bash
git clone https://github.com/NickWaterton/Roomba980-Python.git
cd Roomba980-Python/
pip install six
python ./roomba/getpassword.py -R <IP>

You need the IP since the IP discovery requires UDP broadcast, I’m guessing there’s some docker magic to make the UDP broadcast work but I’m not sure what it is.